Mjerač protoka

NivuFlow 600 Flow Meter

Za mjerenje protoka na principu Dopplera

Za ultrazvučno mjerenje protoka slabo do jako onečišćenih medija djelomično ispunjenih cijevi i kanala. Kompletan mjerni sustav u vezi s KDA senzorima

  • Reasonable purchase costs
  • Reliable, with more than 30 years of product experience
  • Easy mounting without additional constructions
  • Integrated 3-step controller
  • Measurement in heavily polluted and abrasive media
General Description

The OCM F flow metering system utilises a fully bidirectional ultrasonic velocity sensor.

The intelligent Doppler sensor detects and directly evaluates the flow velocity. Other than with mag meters, this method has an absolutely stable zero point. Moreover, the dynamic measurement range for minimum level and flow is very high. Level measurement can be carried out either by a sensor-integrated pressure cell or by using an external sensor.

Operation / Programming

Thanks to the intuitive user interface it is very easy to set up the OCM F for the requirements of various applications. Additional input devices like Computers etc. are not needed. Programmed settings are indicated clearly.

Measurement principle

The measurement principle is based on the classic Doppler method where an ultrasonic signal with a defined frequency is transmitted into a liquid at a known angle. A portion of the ultrasound energy is reflected by the solid particles or gas bubbles carried with the liquid. Due to the movement of the particles a frequency distortion occurs which is direct proportional to the particle velocity. The flow velocity can be determined from this frequency shift subsequently. From the flow profile and the multitude of reflecting particles a frequency spectrum results. This spectrum, suitable for hydraulic assessment of measurement places, can be indicated on the OCM F display. The newly developed intelligent Doppler sensor directly detects and evaluates the flow velocity.


The internal memory enables storage of medium velocity information as well as temperature and flow data. With the frontside USB socket measurement data as well as settings can be read out. The free NivuSoft measurement data software enables easy visualisation of readings.

Typical OCM F applications
  • Wastewater treatment plats: intake and discharge also for aeration tank, sedimation tank and recirculation
  • Permanent measurements on storm water basin and storm water retention basin
  • Flow measurements in channel networks
  • Industrial wastewater networks
  • and many more
Power supply100 to 240 V AC, +10 %/ -15 %, 47 to 63 Hz
or 24 V DC +/- 15%, 5% residual ripple
Power consumptionAC: 7 VA typical, DC: 6 W typical
Enclosure-Material: Polycarbonate
-Weight: ca. 1200 g
-Protection: IP 65
-Installation: wall or DIN rail mounting

Ex-ApprovalII (2)G [Ex ib Gb] IIB
Operating temperature-20 °C to +60 °C / with Ex: -20 °C to +40 °C
Storage temperature-30 °C to +70 °C
Max. humidity90 %, non-condensing
DisplayBack-lit full graphic LCD, 128 x 64 pixel
Operation6 keys, menus in German, English, French and Polish
Inputs-1 x 4 – 20 mA for external level (2-wire probe)
-2 x 0/4 – 20 mA with 12 bit resolution for external level and external setpoint
-4 x digital input
-1 active compact Doppler sensor Type KDA connectable
Outputs-3 x 0/4 – 20 mA, load 500 Ohm, 12 bit resolution,
accuracy 0.1 % (after calibration)
-5 relay (SPDT), max. load 230 V AC / 2 A (cos. 0.9
Controller3-step controller, quick close function, adjustable slide valve position in case of error

Specifikacije su podložne promjenama.

Imate problem? Mi imamo rješenje.

Kontaktirajte nas i dogovorite sastanak.